Category Archives: Architecture and Design

Guide to Burning Tree Stumps

If you are seeking out an inexpensive and clean way to put off vintage tree stumps, you have to don’t forget burning them down. This approach is a totally popular manner to get rid of tree stumps without using any essential device or gear. Furthermore, the fee is extensively decrease than professional stump elimination or stump grinding carrier given that all you need are a few over-the-counter, store-offered merchandise. You can count on to spend everywhere from $20 to $100, relying on the dimensions and amount of the tree stumps. Additional equipment can be required as well, such as a energy drill with wood-uninteresting bit, a gardening spade, compost, and greater. Continue below to see what you may need this unique technique of stump removal.

How to Burn a Tree Stump

This approach isn’t endorsed for each person that doesn’t have experience working with open flames and fire. It is also by no means advocated for areas that are dry or combustible. If you do select to burn your tree stumps, it is important to apply strict inner safety standards. Learn what those are before getting began.

You have to also ask your local hearth department approximately the nearby ordinances for burning tree stumps. A allow can be required in your network, or it is able to not be allowed at all. Also, potassium nitrate is a relatively-explosive chemical, so there can be bans, regulations, or garage regulations on your county.

What You Need:

Potassium Nitrate or Saltpeter
Dry Scrap Wood
Soil (optionally available)
Grass Seed (optionally available)
Power Drill
1-Inch Wood Boring Bit or Spade Bit
8-Inch or 10-Inch Bit Extender
Garden Trowel
Bucket
Funnel
Hot Water
Shovel
Matches

Directions:

After you’ve got checked along with your nearby fire department and city ordinances regarding fireplace use and burning tree stumps, you’re prepared to get started. Never try to burn anything outside at some point of a dry season or fireplace ban. This should result in devastating accidents and damages.

Here’s the way to get commenced:

Put your drill and drill bit together together with the bit extender. Fill your bucket with a gallon of warm water.

Starting on the top-middle of the stump, drill a hollow at a 30 diploma perspective and drill 10 inches deep.

Clean out the inner particles and keep to drill holes throughout the complete stump, starting from the center and ending at the edge. Keep holes 1 inch apart.

10 Clever Ways to Re-Purpose Your Furniture

They say ‘one man’s trash is some other guy’s treasure’ and that’s true, but that does not imply you cannot take your personal junk and make it a treasure over again. By reusing your antique furnishings, you can upload some exceptional appeal to your house d├ęcor. Not simplest that however being able to re-motive furniture is truely quite a few fun. From cabinets to dressers to antique doors to countertops, some thing can be repurposed. All it takes is only a little creativity. So, the subsequent time you are geared up to throw away that vintage facet desk that you’ve been preserving directly to for years, take a look at those 12 clever methods to repurpose your fixtures earlier than you do. You would possibly get a touch proposal.

1. Use an old door as a headboard

If you have got an antique wood door just lying round why not attempt repurposing it as a headboard to your bed. By sanding down any difficult edges, your bed could have an delivered rustic aptitude. Plus, it’s certainly easy to do. All you want is a sander (or simply sandpaper) and a chunk of putty.

2. A bookcase can become a bar
No concept what to do with that old antique bookshelf? The solution is simple: make a bar! By using the shelves to keep glasses, liquor, martini shakers, and perhaps multiple books, you’ll have a high-class bar right for your den, basement or dwelling room. Complete the appearance by adding wine holders and wine glass holders.

Three. Turn a window into a cabinet door
If you’ve got a window that’s intact with lots of character however too antique to really use, then strive creating a cabinet door out of it. You can both make a cupboard or locate one with out a door. Either manner, connect a handle and hinges to the window, attach it to the cabinet, and you are executed. Simple and easy.

4. A cloth wardrobe into a bench
Do you’ve got an vintage dresser which you cannot find any use for? Just turn it right into a bench. A bit of slicing, sawing, and screwing and you’ll have a pleasing seat for one or . If you seal and paint it with exterior merchandise you may even region it out of doors.

5. A buffet cupboard turns into a espresso station
Turning a buffet cabinet right into a espresso station is the perfect component to do. All you have to do is do away with the pinnacle of the cupboard and update it with a kitchen countertop. This will look top notch in the kitchen as a espresso station. Put your mugs, espresso maker, and cream and sugar right here for a high-class appearance.

6. Turn a chair into a nightstand
Do you’ve got a chair you adore but it doesn’t suit your different chairs? Turn it right into a nightstand or (if it is massive sufficient) a table. All you need to do is take off the back and simply use the seat.

7. Turn antique aspect tables into stools
A nightstand or facet desk can be without difficulty converted into a stool via sincerely including a cushion to the top. This is in particular beneficial when you have lots of aspect tables for some cause.

Eight. An easel will become a TV stand
A massive and heavy-obligation artist’s easel can without difficulty turn out to be a TV stand if it’s sturdy enough. Plus, it adds an thrilling dimension on your living room and is a outstanding verbal exchange piece. Just place the TV on the lowest shelf and convey the pinnacle one down as in case you were propping up a canvas.

9. Turn a secretary table into a linen cabinet
Secretary desks, in particular those with a tall hutch, can be repainted and located within the bathroom or hallway as a linen cupboard. Best of all, there’s slightly any fussing required.

10. A chest becomes a espresso desk
If you have got a heavy duty timber chest or trunk this is the right peak, then you can without problems flip it into a coffee desk. Just use a sealer at the pinnacle or location a pane of glass. If you are truely accessible with gear you could make the top open up like a garage door.

Go It Alone and When to Call a Professional

Now, due to the DIY push, peoples’ self belief of their capacity to repair just about whatever in their homes, including their fridge, is high, and that’s an excellent aspect. The hassle is that possibly this confidence is probably a chunk too excessive.

The accelerated self belief might also put you in a situation wherein you dive deep right into a restore that you’re not truly prepared to tackle. There are some DIY advocates that have spread the word concerning the way to inform if you must address a restore, essentially pronouncing, “If it has bolts, screws, or on hand pieces, you may knock it out yourself.” The doctrine has unfold, as visible with such cool areas inclusive of DIY vehicle storage spaces in which you may use professional gadget & gear, but you make the repairs. They additionally have innovative crafts hubs with available workshops for the aspiring “DIYer”.

Sure, the portions may appear to make sense, and you could have a general concept may additionally have of the way the restore will move, but that does not imply it is the quality selection to try to have a move your self. Being armed with an rental tool package & on line video instructions does now not a repair person make. In truth, you’ll be causing more problems than the only you started out with, and that can only suggest one factor – spending even extra cash for maintenance to cowl what was wrong inside the first area & the mess you can have prompted.

People pick out the DIY course because it imagined to save money. Depending on how huge the restore and the scope of the repair, trying to do the work your self may be the most value-efficient manner to get the job accomplished. This is absolutely an awesome aspect. You need so that it will do primary upkeep in your home due to the fact that’s what a responsible owner of a house does. But recognise your limits.

When it involves identifying to address DIY tasks, use common experience approximately that which with you experience comfortable. Cleaning condenser coils is straightforward sufficient. Replacing a worn door gasket must be surprisingly smooth. Thawing out a drainage line is a chunk of cake. The principal point to cast off from all of this is that you don’t try to do some thing past your comfort stage, and even if it looks like a defeat, constantly be inclined to call a expert to help get the activity executed.

DIY fridge restore may not be one of these pipe dream. The key is knowing that every now and then a expert may be warranted, and calling a pro does not make you vulnerable – it makes you sensible.

How To Board Your Loft Guide

Boarding out your own loft may be a daunting task.

This article offers you with the entirety you want to realize approximately boarding out lofts. Details are also furnished about insulation requirements whilst boarding out your loft space.

Why board out your loft?

It is a notable way of gaining extra storage space within your property.
Boarding a loft makes it easier to get right of entry to heating pipes and electric connections. But most effective if forums are laid out carefully adjacent to the pipes.
It makes your loft a safer vicinity. Once boarded you’ll not should fear about by accident falling thru your ceiling. You can also flow round heavy packing containers with out constantly watching where you are treading.

Things to remember when boarding out your loft

It is essential to don’t forget the sort of insulation you will install, and what kind of.
Ensure clean access to pipes and electrical cables while boarding your loft. Ideally board round pipes and cable if you could. If there may be a leak or electrical fault, you want to make sure get admission to is possible.
Consider how you’ll access your loft. Loft floors is typically raised in recent times because of thicker insulation being used. However, you do not need your floor raised an excessive amount of around the loft get admission to region. This will make it less difficult so as to get admission to your loft thru the step ladder.

How to board your loft – Step by step manual:

What’s wished?

Loft legs. These are plastic legs approximately 175mm in length. Loft boards are then screwed on top of those legs. It is essential to raise the peak of your loft floor as thicker insulation necessities are wanted.
Loft tongue and groove boards.
Loft board screws.
Drill with Pozi drive (permits rapid screwing)

Safety wear

Quality dust mask.
Goggles.
Disposable paper match.

Step 1 – Location and size of loft boarding:

Decide whether or no longer the whole loft needs to be boarded.
Usually humans best require a small storage space inside the loft.
Large regions of loft boarding can be very highly-priced.
Try to location your loft boarding near the loft hatch.
Choose an area in which there are not any water pipes, or some thing else you can want get admission to too. If you board over such matters it is going to be difficult to attain it.
Loft legs raise your loft ground through 175mm, they can be purchased from neighborhood DIY stores. Therefore you can need to put in a decrease ground subsequent in your loft front. This is normally finished be putting timber at once on top of the joists.

Step 2 – Insulation height:

Insulation requirements for homes have improved over the previous few a long time. Most older houses have an insulation thickness of 100mm simplest, among the joists. Loft boards have been truly laid on top of the joists then screwed in.
Current insulation requirements endorsed via the Energy Saving Trust are 270mm. This parent is based totally on glass fibre wool insulation.

Step 3 – Insulation kinds:

There are many kinds of insulation out there, all having specific properties. The most commonplace type is glass fibre. However, you may use PIR insulation forums. PIR foam board is more effective then glass wool by using a element of two. This approach 100mm of PIR board is equal to 200mm of glass fibre wool.
Usually clients go for preferred glass fibre insulation because of its price effectiveness.

Make Your Concrete Floors A Work Of Art

Concrete foundations are crucial for almost each type of constructing. There are several exclusive types of slabs which can be used to make the inspiration of your constructing. Fortunately, these do now not should be dull and boring. Much like polished concrete, with a dash of color here and there, you may without problems turn your own flooring into a work of art.

Read on to discover everything you want to realize approximately coloring concrete foundations.

Preparation

Before you try to add coloration or make styles on your cement flooring, it’s far extremely vital to understand whether or not your challenge can be capable of face up to the changes which you want to make. This approach that your concrete slab wishes to be intact before you can begin designing it.

Since seams and crevices for your floors can almost wreck the design, it is important to restore your cement flooring earlier than you try to personalize it. It is likewise critical to realize which you can’t paint a concrete floor until it’s miles cured. Therefore, if you have a cement slab which was lately built and mounted, it’s miles necessary to attend at least four weeks earlier than you can begin painting it.

New concrete systems need to additionally be left to dry out evidently without the use of any curing chemical substances. Since the addition of chemical compounds and different drying marketers can motive problems during staining, if you wish to layout and customise your home, it is quality to go away the concrete surface to dry naturally although it takes a bit longer than four weeks. Once the concrete has dried, acrylic fillers have to be used to fill any cracks in the cement slab.

Once the concrete has dried and has been repaired, the following step is to thoroughly easy the entire floor earlier than you paint it. Since it’s miles very clean and commonplace for dust and other contaminants to get stuck into it, you ought to use a strength washer for exterior surfaces. An extra cleansing agent might be required for the interior.

Painting

The roller which you may be using to color it, needs to be wiped clean to ensure that the quit result does no longer have any blemishes or different contaminants like dirt. When you start painting it, a paint brush should be used to color the grooves of the concrete. Initially, it’d seem like a number of paint is needed to color your surface, but that is handiest because a whole lot of the paint might be absorbed through the concrete.

Once the primary coat has dried, you could then upload next coats of stain relying for your required shade and end. In case you want to use textured paint to it, you may need to use a primer earlier than you may begin making use of to stain. If a primer is not used ahead when applying textured paint, it’s miles very possibly that the cease end result will not be as proper as anticipated. With the new surface, concrete foundations typically mimic the modern appearance of herbal stone.